Gledhill
Gledhill Stainless Lite Plus Direct 180Ltr Ee Unvented Cylinder HRPPLUDR180
Gledhill Stainless Lite Plus Direct unvented hot water cylinder with a 180 litre capacity.
£570.44
£475.37 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Gledhill Stainless Lite Plus Direct 180Ltr Ee Unvented Cylinder is a mains-pressure hot water storage cylinder from the Gledhill Stainless Lite Plus range. It is the 180 litre direct variant, heated at the cylinder itself rather than from a separate boiler circuit. It supplies pressurised hot water to the outlets in an unvented system.
Signs this part needs replacing
- Water weeping or pooling at the base of the cylinder or around the tappings
- Visible corrosion, pitting or blistering on the cylinder shell
- Hot water pressure or flow at the outlets has dropped noticeably
- The cylinder no longer holds its stored temperature or heats unevenly
Before you order
- Confirm the existing cylinder is a direct, unvented unit and that 180 litres matches the installed capacity
- Check the model reference on the existing cylinder and the appliance it serves against the fits list above
- Confirm the available space, connection positions and pipework layout suit the replacement cylinder
- Verify the discharge pipework and safety controls on the unvented installation are in place and serviceable
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| SPECIAL OFFERS Gledhill Boilermate | — | — | — | |
| SPECIAL OFFERS Gledhill Stainless Lite Plus | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.