
Worcester Bosch
Worcester Bosch Hinge Door 7101520
Hinged casing door, part 7101520, for Buderus GB162 and Logamax Plus GB162 boilers.
At a glance
- Appliance family: Buderus GB162
- Also known as 2242087
£20.56
£17.13 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Worcester Bosch hinge door, part number 7101520, is a hinged casing door for Buderus GB162 and Logamax Plus GB162 boilers. It provides hinged access to the internal compartment of the appliance. It is listed for the models shown below.
Signs this part needs replacing
- The door no longer closes or latches correctly.
- Hinge pins or mouldings are cracked, worn or broken.
- The door sits misaligned against the casing.
- The door rattles or vibrates during operation.
- The door is difficult to open or remove for servicing.
Before you order
- Confirm your boiler model against the fitment list above.
- Check the part number on the existing door or in the manufacturer's parts list.
- Inspect the hinge and mounting points on the appliance for damage before fitting.
Compliance
| Barcode / EAN | 4047416306674 |
|---|---|
| Alternative numbers | 2242087 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BUDERUS GB162-100 G20 | — | — | — | |
| BUDERUS GB162-50 G20 | — | — | — | |
| BUDERUS GB162-65 G20 | — | — | — | |
| BUDERUS GB162-80 G20 | — | — | — | |
| BUDERUS LOGAMAX PLUS GB162 65KW | — | — | — | |
| BUDERUS LOGAMAX PLUS GB162 80KW/100KW | — | — | — | |
| WORCESTER GB162-100 G20 | — | — | — | |
| WORCESTER GB162-50 G20 | — | — | — | |
| WORCESTER GB162-65 G20 | — | — | — | |
| WORCESTER GB162-80 G20 | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
