
Gledhill
Gledhill GT045 Pump Housing and Valve
Pump housing and valve assembly for Gledhill Pulsacoil, Boilermate, Electramate and Gulfstream 2000 units.
At a glance
- Also known as 2000369
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
Replaced by GT049
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The Gledhill GT045 is a pump housing and valve assembly used on Gledhill thermal store and cylinder appliances. It houses the circulation pump and incorporates a check valve controlling flow through the primary circuit. It is supplied by Gledhill as a service part for the appliance families listed below.
Signs this part needs replacing
- Circulation pump housing leaking from seals, joints or the body
- Loss of primary flow or poor hot water recovery from the cylinder
- Check valve failing to seat, allowing unwanted gravity circulation or backflow
- Visible corrosion, scale build-up or cracking around the housing
- Pump running with reduced or no effect on the primary circuit
Before you order
- Confirm the appliance model matches one of the fitments listed above
- Check the pump housing and valve arrangement on the unit against the part number GT045
- Verify whether the fault lies with the housing and valve or with the pump motor itself
- Confirm the primary circuit has been isolated and drained before removal
Compliance
| Alternative numbers | 2000369 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| GLEDHILL Boilermate 2000 | — | — | — | |
| GLEDHILL Electramate 2000 12KW | — | — | — | |
| GLEDHILL Electramate 2000 9KW | — | — | — | |
| GLEDHILL Gulfstream 2000 | — | — | — | |
| GLEDHILL Pulsacoil 2000 | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
