
Sime
Sime Fuse T100mA Main PCB 6233503
T100mA fuse for the main PCB in Sime Friendly E and Super 80, 90 and 102 DE-LUXE gas boilers.
At a glance
- Also known as 2041180
£2.16
£1.80 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Sime 6233503 is a T100mA fuse supplied for the main printed circuit board. It protects the PCB and its connected circuits in Sime gas boilers, interrupting the supply if the current drawn exceeds the fuse rating.
Signs this part needs replacing
- Boiler is completely dead, with no display, LEDs or response to a demand for heat or hot water
- Fuse element is visibly ruptured, blackened or discoloured
- Fuse blows again immediately after being replaced
- No supply reaching the main PCB even though power is present at the boiler
Before you order
- Confirm the rating marked on the failed fuse or on the board matches T100mA
- Check the boiler model against the fit list above
- Isolate the electrical supply before removing or fitting the fuse
- Establish why the fuse failed — repeated blowing points to a fault elsewhere on the PCB or its wiring
Compliance
| Alternative numbers | 2041180 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| SIME FRIENDLY E - 8088906 | 47-719-05 | 47-719-05 | — | — |
| SIME SIME FRIENDLY E | — | — | — | |
| SIME SIME SUPER 102 DE-LUXE | — | — | — | |
| SIME SIME SUPER 80 | — | — | — | |
| SIME SIME SUPER 90 | — | — | — | |
| SIME SUPER 102 DE-LUXE - 8088903 | 47-719-02 | 47-719-02 | — | — |
| SIME SUPER 80 - 8088904 | 47-719-06 | 47-719-06 | — | — |
| SIME SUPER 90 - 8088902 | 47-719-01 | 47-719-01 | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
