
Ideal
Ideal Flow Group Kit BI1141 502 172510
Ideal 172510 flow group kit (BI1141 502) — a diverter valve assembly for Ideal Europa and Mini combi boilers, switching flow between heating and hot water.
At a glance
- Part type: Diverter valve / flow group kit
- Also known as 1178856
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The Ideal 172510 flow group kit is a diverter valve assembly supplied by Ideal for its combi boiler range. In a combi boiler the diverter valve is the component that decides where the heated water goes: either around the central heating circuit to the radiators, or through the domestic hot water section to the taps. The kit is listed under Ideal's diverter valves and hydraulics group and carries the reference BI1141 502.
Signs this part needs replacing
- Hot water runs hot then cools while the tap is still open, or the boiler struggles to hold a steady DHW temperature.
- Radiators stay cold when only hot water is being drawn, or heat up when the hot tap is running.
- The boiler fires for heating but the flow pipe stays cool, pointing to a diverter stuck in the hot water position.
- Water weeping from around the valve body or the hydraulic section of the boiler.
- The valve feels stiff or fails to move through its full travel when the actuator is operated.
Before you order
- Confirm the boiler model and, where shown on the data badge, the GC number against the compatibility list below.
- Check the existing part number on the boiler before ordering, as the alternative number 1178856 may be marked on the original component.
- Inspect the seals and gaskets on the hydraulic block while the boiler is open, and replace any that are perished or flattened.
- Work on the boiler should be carried out by a competent person; isolate the electrical supply and water before dismantling the hydraulic section.
Mechanical
| Part type | Diverter valve / flow group kit |
|---|
Compliance
| Manufacturer part number (MPN) | 172510 |
|---|---|
| GC number | 41-392-98, 41-392-99 |
| Barcode / EAN | 5022141725104 |
| Alternative numbers | 1178856 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL IDEAL : EUROPA 224 | — | — | — | |
| IDEAL IDEAL : EUROPA 228 | — | — | — | |
| IDEAL IDEAL : MINI S24 | — | — | — | |
| IDEAL IDEAL : MINI S28 | — | — | — | |
| IDEAL MINI S24 | 41-392-98 | 41-392-98 | — | — |
| IDEAL MINI S28 | 41-392-99 | 41-392-99 | — | — |
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
