Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Glow-worm Fan Assembly Flexicom GLOWWORM0020020734

Glow-worm

Glow-worm Fan Assembly Flexicom GLOWWORM0020020734

At a glance

  • Part type: Fan assembly
  • Appliance family: Flexicom
  • Also known as 1337783, N5039, GLOWWORM0020020734
Manufacturer part no.
0020020734
Showing prices

£218.42

£182.02 ex. VAT · VAT at 20%

In stock
Order within 2h 40m for same-day dispatch
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Glow-worm 0020020734 is a fan assembly used on Flexicom boilers. It sits in the combustion circuit and provides the forced draught that draws air into the burner and drives the products of combustion out through the flue terminal. Because the boiler's safety interlock depends on proven fan operation, a failing assembly usually shows up as a lockout rather than a gradual loss of performance.

The unit is supplied as a complete assembly, so the motor, housing and impeller are replaced together rather than rebuilt on site.

Signs this part needs replacing

  • The boiler locks out on start-up or during a run cycle with a fan or air-pressure related fault code.
  • A whine, rumble or grinding noise comes from the fan housing when the boiler fires.
  • The fan runs intermittently, or the boiler drops out mid-cycle once the burner has lit.
  • The impeller is stiff to turn by hand, or does not spin freely when the boiler calls for heat.
  • Soot, condensate staining or debris is visible around the fan mounting or flue connection.

Before you order

  • Check the boiler's model and GC number against the compatibility list, as Flexicom variants use different assemblies.
  • Confirm the number on the existing fan matches 0020020734 before ordering.
  • Inspect the fan mounting gasket and flue seals while the boiler is open, and renew them if they are perished.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.