
Altecnic
Altecnic Inlet Control Group 6Bar Relief 3Bar Reducing F0001021
Altecnic inlet control group combining a 6 bar relief valve and a 3 bar reducing valve for unvented control valve assemblies.
£135.85
£113.21 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic Inlet Control Group is a combined inlet control assembly for unvented hot water systems, bringing together a 6 bar relief valve and a 3 bar reducing valve in a single unit. It regulates the incoming mains supply down to a stable working pressure while providing over-pressure protection for the cylinder. The assembly is manufactured by Altecnic and sits within their pressure reducing valve and unvented control valve ranges.
Signs this part needs replacing
- Water discharging from the relief valve outlet when the system is at normal operating pressure
- Unstable or excessively high outlet pressure downstream of the reducing valve
- Noisy operation or water hammer at the inlet control group
- Visible scale, corrosion or leaking from the valve body or connections
- Reduced flow through the assembly despite adequate mains supply
Before you order
- Confirm the relief and reducing pressure settings match the requirements of the unvented cylinder and its controls
- Check the assembly is being fitted to an Altecnic pressure reducing valve or unvented control valve installation
- Verify the existing valve arrangement and connection points against the unit before removal
- Note the part number F0001021 to ensure the correct variant is selected
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC Pressure reducing Valves | — | — | — | |
| ALTECNIC Unvented control valves | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
