Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Heatline Expansion Vessel 3003200028

Heatline

Heatline Expansion Vessel 3003200028

7 litre expansion vessel for Heatline gas boilers, absorbing system water expansion and stabilising heating circuit pressure.

At a glance

  • Also known as 2171036
Manufacturer part no.
D003200028
Showing prices

£260.99

£217.49 ex. VAT · VAT at 20%

Available to order · 1-2 working days
Available to order · 1-2 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Heatline expansion vessel is a 7 litre diaphragm vessel used in Heatline gas boilers. It absorbs the volume increase of water as the heating circuit warms, keeping system pressure within the range the boiler expects. The internal diaphragm separates the air charge from the system water, so the vessel can be recharged or replaced when the diaphragm fails.

Signs this part needs replacing

  • Boiler pressure rises sharply when the heating is running and falls again once it cools.
  • System pressure drops repeatedly and needs topping up, with no visible leak on the pipework or radiators.
  • Water discharges from the pressure relief valve during normal operation.
  • The vessel feels heavy or sounds full of water when tapped, indicating a failed diaphragm.
  • The air charge will not hold after recharging through the Schrader valve.

Before you order

  • Confirm the boiler model and, where applicable, the serial number against the fit list above.
  • Check the vessel's physical size and connection arrangement against the unit fitted to the appliance.
  • Verify the system pressure gauge and relief valve are working correctly before condemning the vessel.
  • Have the system drained and the boiler isolated before removal.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.