Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Baxi Expansion Vessel S62753

Baxi

Baxi Expansion Vessel S62753

Expansion vessel S62753 for Baxi Avanta Exclusive, Avanta Plus Combi and System, and Potterton Profile system boilers.

Manufacturer part no.
S62753
GC number
H39-138
Showing prices

£126.00

£105.00 ex. VAT · VAT at 20%

In stock
Order within 2h 32m for same-day dispatch
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Baxi S62753 is an expansion vessel used in Baxi Avanta Exclusive, Avanta Plus Combi and Avanta Plus System boilers, and in Potterton Profile system models. It absorbs the volume change in the heating circuit as the system water heats and cools, keeping the boiler's working pressure within range and reducing stress on the pressure relief valve and other components.

Signs this part needs replacing

  • Boiler pressure climbs sharply as the system heats up and drops back again once it cools.
  • Water is discharging from the pressure relief valve, or the valve is weeping continuously.
  • System pressure needs topping up regularly even though there is no visible leak on the pipework.
  • The pressure gauge reads high with the heating off, or the boiler cuts out on a pressure fault.
  • Water or corrosion staining is present around the vessel connection point.

Before you order

  • Confirm the boiler model and GC number against the fit list above before ordering.
  • Check whether the appliance is the combi or system variant, as the vessel is listed against specific models in each range.
  • Compare the existing vessel's connection and mounting arrangement with the boiler's installation before fitting.
  • Check the system charge pressure and the operation of the pressure relief valve, as a faulty valve can produce similar symptoms to a failed vessel.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.