
EOGB
EOGB L01-QRB1B-1 QRB1B Photocell 360mm 80mm Head
EOGB QRB1B photocell, 360 mm long with 80 mm red head, for oil burner flame detection.
At a glance
- Also known as 2090758
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The EOGB L01-QRB1B-1 is a QRB1B photocell with a 360 mm length and an 80 mm red head. It is used in oil burner flame detection and is listed for oil boiler spares applications. The part is associated with EOGB, Siemens and Landis burner systems.
Signs this part needs replacing
- Burner locks out and fails to establish flame.
- Photocell fails to detect flame, causing shutdown after ignition.
- Intermittent lockouts or nuisance shutdowns occur.
- Boiler starts then cuts out when the flame signal is lost.
- Control box indicates flame failure despite the burner firing.
Before you order
- Confirm the existing photocell is a QRB1B type.
- Check the required lead length and head size against the 360 mm and 80 mm dimensions.
- Verify the head type matches the red head design.
- Check compatibility with the appliance and control system listed under Fits.
Compliance
| Alternative numbers | 2090758 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Siemens - Landis | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
