
EOGB
EOGB E03-KBB-90-20 Fire Valve 90C 2M KBB
EOGB fire valve with a 90°C trip temperature and 2 metre capillary, for oil-fired boiler installations.
At a glance
- Also known as 2090044
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The EOGB E03-KBB-90-20 is a fire valve of the KBB pattern, rated to trip at 90°C and supplied with a 2 metre capillary. It forms part of the safety arrangement on an oil-fired appliance, shutting off the oil supply when the sensing element reaches its set temperature. The valve is listed for use with EOGB Teddington appliances.
Signs this part needs replacing
- The valve fails to shut off the oil supply when tested.
- The capillary is kinked, crushed or damaged along its run.
- The sensing phial or valve body shows corrosion, leakage or mechanical damage.
- The valve has tripped and will not reset or re-arm correctly.
- Oil is present around the valve body or its connections.
Before you order
- Confirm the required trip temperature matches the appliance and installation requirements.
- Check that a 2 metre capillary will reach from the valve position to the sensing point without being strained.
- Verify the valve pattern and connection arrangement against the existing installation.
- Check the appliance make and model against the fitment list.
Compliance
| Alternative numbers | 2090044 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Teddington | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
