
EOGB
EOGB Fire Valve 65C 1.5m KBB (BIO) E03-KBB-65-15-B
EOGB fire valve with a 65°C trip temperature and 1.5 m capillary, KBB series, BIO variant.
At a glance
- Also known as 2090844
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The EOGB E03-KBB-65-15-B is a fire valve with a 65°C trip temperature and a 1.5 m capillary, supplied in the KBB series and carrying the BIO designation in its part name. It is used on EOGB Teddington appliances to shut off the fuel supply when the sensing element detects an overheat condition. The valve is listed in the gas valve category for boiler spares.
Signs this part needs replacing
- The valve trips at temperatures below its 65°C rating, cutting the fuel supply during normal operation.
- The valve fails to shut off the fuel supply when the sensing element is heated.
- The capillary tube is kinked, crushed or damaged along its 1.5 m run.
- Fuel is weeping from the valve body or its connections.
- The sensing element or reset mechanism is physically damaged or seized.
Before you order
- Confirm the existing valve is rated at 65°C, as fitting a valve with a different trip temperature will change the protection behaviour.
- Check the required capillary length on the appliance, as this valve has a 1.5 m capillary.
- Verify the part number E03-KBB-65-15-B and the KBB series and BIO designation match the valve being replaced.
- Confirm the appliance is an EOGB Teddington unit before ordering.
Compliance
| Alternative numbers | 2090844 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Teddington | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
