Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Ideal Electrode 154818

Ideal

Ideal Electrode 154818

Ideal electrode, part 154818, for Concord CXA commercial boilers including CXA 100H, CXA 100P and CXA 110 models.

At a glance

  • Part type: Electrode
  • Also known as 1177135, N7390
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
154818
Showing prices

£41.74

£34.78 ex. VAT · VAT at 20%

Available to order · 3 working days (HRP Trade)
Available to order · 3 working days (HRP Trade)
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ideal 154818 is an electrode supplied for Ideal commercial Concord CXA boilers. It forms part of the ignition and flame-monitoring circuit inside the combustion chamber, where it provides the spark at burner start-up and helps the control board confirm that a flame has been established. The part carries the manufacturer reference 45.900.413-003 and is listed under the Electrodes & Ignitions spare part group.

Signs this part needs replacing

  • The boiler attempts to light but there is no spark at the burner, or ignition is weak and intermittent.
  • The appliance locks out shortly after start-up because no flame signal is detected.
  • Repeated lockouts that clear on reset and then return on the next demand for heat.
  • The electrode tip is visibly burnt, eroded, sooted or bridged, or the ceramic insulator is cracked or discoloured.
  • The electrode lead connection is loose, corroded or heat-damaged at the terminal.

Before you order

  • Check the appliance GC number and model against the compatibility list below before ordering, as several Concord CXA variants use different electrode arrangements.
  • Confirm the number on the existing electrode or the boiler's parts list matches 154818, 45.900.413-003, 1177135 or N7390.
  • Inspect the electrode gasket, seal and lead at the same time, as these are commonly disturbed or degraded when the electrode is removed.
  • Work on the combustion chamber and ignition circuit should be carried out by a competent engineer following the manufacturer's instructions.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.