Ideal
Ideal 175592 Detection Electrode
Ideal 175592 detection electrode for Logic, Code Combi and Independent boilers, sensing flame presence at the burner.
At a glance
- Part type: Detection electrode
- Appliance family: Logic, Code Combi, Independent
- Also known as ELECTRODE-DETECTION
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
£22.40
£18.67 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ideal 175592 is a detection electrode used in Ideal Logic, Code Combi and Independent boiler ranges. Mounted at the burner, it monitors whether a flame has established and relays that signal back to the boiler's control board. A clean, stable signal from this electrode is what allows the boiler to move from ignition into normal running.
Signs this part needs replacing
- The boiler locks out shortly after the burner lights
- Ignition is attempted repeatedly but the flame is not sustained
- A flame failure or ignition fault code appears on the display
- The boiler shuts down intermittently while there is still a demand for heat or hot water
- The electrode tip is heavily carboned, cracked or visibly eroded when inspected
Before you order
- Confirm the boiler model and GC number against the compatibility information before ordering
- Match the part number on the existing electrode to 175592 to be sure of the correct item
- Inspect the electrode lead and the seal around its mounting point at the same time, as these are disturbed during replacement
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Mechanical
| Part type | Detection electrode |
|---|---|
| Appliance family | Logic, Code Combi, Independent |
Compliance
| Manufacturer part number (MPN) | 175592 |
|---|---|
| Commodity code | 8403 90 00 00 |
| GPC classification | Household Boilers/Furnaces/Tank Water Heaters Replacement Parts/Accessories |
| Alternative numbers | 5022141755927, ELECTRODE-DETECTION, 43375852 |
No fitment data held for this part.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.