Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Grant Diverter Valve MPCBS20/A

Grant

Grant Diverter Valve MPCBS20/A

Grant diverter valve MPCBS20/A for Grant Combi 70, 90 and Max boilers, directing water flow between heating and hot water circuits.

At a glance

  • Part type: Diverter and motorised valves
  • Also known as 2160005
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
MPCBS20/A
Showing prices

£355.99

£296.66 ex. VAT · VAT at 20%

In stock
Order within 2h 40m for same-day dispatch
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Grant diverter valve MPCBS20/A is a hydraulic component used in Grant combi appliances. It sits in the water circuit and directs flow between the domestic hot water and heating sides of the boiler, so the appliance delivers hot water on demand and switches back to heating without cross-flow. It is supplied as a Grant Spares part and is listed under the diverter and motorised valve group.

Signs this part needs replacing

  • Hot water runs cold or fluctuates while the heating is calling for heat
  • Radiators warm up when a hot tap is opened, indicating the valve is passing
  • The valve head does not move or is slow to change position between heating and hot water
  • Domestic hot water temperature drops when another outlet is used
  • Water weeping from the valve body or around the actuator head

Before you order

  • Confirm the appliance model and serial number against the compatibility list before ordering
  • Check the existing valve is marked MPCBS20 or MPCBS20/A, as the earlier MPCBS20 number is listed against this part
  • Inspect the seals and washers on the valve body and replace them if they are compressed or perished
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.