Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Danfoss BFP 11 R3 Oil Pump Without Coil

Firebird

Danfoss BFP 11 R3 Oil Pump Without Coil

Danfoss BFP 11 R3 oil pump supplied without a coil, for Firebird FB 2 K and FB 4 R low NOx burners.

Manufacturer part no.
FE65327227
Showing prices

£153.97

£128.31 ex. VAT · VAT at 20%

Available to order · 5-7 working days
Available to order · 5-7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Danfoss BFP 11 R3 is a rotary oil pump used on Firebird pressure-jet burners. It is supplied without a coil, so the solenoid coil is ordered separately or reused from the pump being replaced. The pump meters and pressurises the fuel supply to the burner nozzle.

Signs this part needs replacing

  • The burner locks out repeatedly and will not establish a stable flame
  • Oil pressure at the pump gauge port falls below the setting required for the nozzle, or cannot be adjusted
  • Combustion becomes smoky or the flame is unstable despite a clean nozzle and correct settings
  • The pump is noisy in operation, indicating wear in the internal gears
  • Oil weeps from the pump body, shaft seal or solenoid stem

Before you order

  • Confirm the burner model matches one of the fitments listed above
  • Check the pump body is marked BFP 11 R3 before removing the old unit
  • Confirm the existing coil is serviceable and can be transferred, or order a coil separately, as the pump is supplied without one

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.