
Heatrae Sadia
Heatrae Sadia Complete Controls Assembly 7032844
Complete controls assembly for Heatrae Sadia Electromax 6kW and 9kW ERP underfloor models.
At a glance
- Appliance family: Electromax ERP
- Also known as 1736127
£841.20
£701.00 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The COMPLETE CONTROLS ASSEMBLY - UNDERFLOOR MODEL is a Heatrae Sadia control assembly supplied under part number 7032844. It forms the control kit for Electromax underfloor variants and is the assembly that governs the appliance's control functions. It is listed for the underfloor model rather than the radiator version of the same appliance.
Signs this part needs replacing
- The appliance fails to respond to control input, with no change in operation when settings are adjusted.
- Control functions cut out or behave erratically, with the appliance cycling on and off without a call for heat.
- The control panel or display goes dead or shows no output while the appliance still has power.
- The appliance will not run at all, or runs continuously with no way to shut it down from the controls.
Before you order
- Confirm the appliance model is an Electromax ERP unit and note its kW rating and cylinder size so it matches the fitment list.
- Check whether the appliance is the underfloor or radiator variant, as this assembly is the underfloor model.
- Confirm the existing control assembly part number is 7032844 before removing any components.
Compliance
| Alternative numbers | 1736127 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| HEATRAE SADIA ELECTROMAX 6KW 180L RADIATOR ERP | — | — | — | |
| HEATRAE SADIA ELECTROMAX 6KW 180L UNDERFLOOR ERP | — | — | — | |
| HEATRAE SADIA ELECTROMAX 9KW 180L RADIATOR ERP | — | — | — | |
| HEATRAE SADIA ELECTROMAX 9KW 180L UNDERFLOOR ERP | — | — | — | |
| HEATRAE SADIA Electromax 6kW 180L Underfloor ErP | — | — | — | |
| HEATRAE SADIA HEATRAE SADIA PRODUCTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
