Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Ravenheat Circulation Pump 0009CIR11005/0

Ravenheat

Ravenheat Circulation Pump 0009CIR11005/0

Ravenheat 0009CIR11005/0 circulation pump for CSI 120 and CSI 150 Low NOX boilers, moving heating water around the system.

At a glance

  • Part type: Circulation pump
  • Appliance family: CSI Low NOX
  • Also known as 1841389
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
0009CIR11005/0
GC number
H21-163
Showing prices

£141.92

£118.27 ex. VAT · VAT at 20%

In stock
Order within 37m for same-day dispatch
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ravenheat 0009CIR11005/0 is a circulation pump used in Ravenheat CSI Low NOX condensing boilers. It moves water from the boiler through the heating circuit and back, maintaining flow across the heat exchanger and radiators. The pump is a serviceable item and is listed by Ravenheat under its boiler spares range.

Signs this part needs replacing

  • The boiler fires but radiators stay cold or heat unevenly, with little or no flow at the pump.
  • Grinding, humming or rattling noise from the pump housing during operation.
  • The pump body is hot but the pump rotor is not turning.
  • The boiler locks out or trips on overheat shortly after a demand for heat.
  • Visible weeping from the pump body or its connections.

Before you order

  • Check the GC number and model plate on the appliance against the compatibility list before ordering.
  • Confirm the pump connections and body match the unit being replaced, as CSI 120 and CSI 150 variants are covered by this part number.
  • Check whether a gasket or seal kit is needed for the pump connection on your appliance.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.