Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Alpha Cap Screw M5 x 28mm Socket Head 1.023012

Alpha

Alpha Cap Screw M5 x 28mm Socket Head 1.023012

M5 x 28 mm socket head cap screw from Alpha, used to secure the cold water inlet manifold on compatible Alpha gas boilers.

At a glance

  • Also known as CAPSCREW-M5-X-28-SOCKET-HEAD, 1257829
Hanicks code
1.023012
Manufacturer part no.
1.023012

AvailabilityCall for price

Availability: no longer made. Call us and we'll check for stock.

No longer made: call us

The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.

01302 279234

Opening hours

Mon–Fri
7:30am–5pm
Sat
9am–12pm
Sun
Closed

Or request a price online

Tell us what you need and we will come back to you. No payment is taken.

Part: 1.023012 Alpha Cap Screw M5 x 28mm Socket Head 1.023012

Whichever you would like us to reply to.

Helps us check the part fits.

30-day returns

Unused, in original packaging.

What it is

The Alpha 1.023012 is an M5 x 28 mm socket head cap screw. It is used to secure the cold water inlet manifold on compatible Alpha gas boilers. The hex socket head allows the screw to be driven with a hex key where access around the manifold is restricted.

Signs this part needs replacing

  • Corrosion or rust on the screw head or threads
  • Rounded or stripped hex socket that will not take a key
  • Water staining or weeping around the manifold joint
  • Screw seized in the thread or snapped during removal
  • Manifold fixing loose because the screw no longer holds torque

Before you order

  • Confirm the removed screw is M5 x 28 mm and matches the socket head type
  • Check the appliance model against the fit list above
  • Inspect the manifold and its seal, as a leaking joint may need more than the screw alone
  • Check whether any other fixings on the manifold are also damaged

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.