
Baxi
Baxi By-Pass Pipe Assembly 7826118
Baxi by-pass pipe assembly, part number 7826118, classed as a hose and pipe part for Baxi System 2 boilers.
At a glance
- Part type: Hoses & Pipes
£25.20
£21.00 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Baxi 7826118 By-Pass Pipe Assembly is a hose and pipe part manufactured by Baxi for its System 2 boiler range. It is supplied as a pre-formed pipe assembly for use within the boiler's pressure gauge and water circuit arrangement.
Before you order
- Confirm your boiler model and serial number against the fitment list above.
- Check whether your appliance uses a front-facing or internal fit pressure gauge.
- Compare the existing pipe assembly with the replacement before fitting.
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BAXI 615 SYSTEM 2 - FRONT FACING ANALOGUE PRESSURE GAUGE | 41-884-01 | 41-884-01 | — | — |
| BAXI 615 SYSTEM 2 - INTERNAL FIT PRESSURE GAUGE | 41-884-01 | 41-884-01 | — | — |
| BAXI 618 SYSTEM 2 - FRONT FACING ANALOGUE PRESSURE GAUGE | 41-884-02 | 41-884-02 | — | — |
| BAXI 618 SYSTEM 2 - INTERNAL FIT PRESSURE GAUGE | 41-884-02 | 41-884-02 | — | — |
| BAXI 624 SYSTEM 2 - FRONT FACING ANALOGUE PRESSURE GAUGE | 41-884-03 | 41-884-03 | — | — |
| BAXI 624 SYSTEM 2 - INTERNAL FIT PRESSURE GAUGE | 41-884-03 | 41-884-03 | — | — |
| BAXI 818 SYSTEM 2 - FRONT FACING ANALOGUE PRESSURE GAUGE | 41-470-99 | 41-470-99 | — | — |
| BAXI 818 SYSTEM 2 - INTERNAL FIT PRESSURE GAUGE | 41-470-99 | 41-470-99 | — | — |
| BAXI 824 SYSTEM 2 - FRONT FACING ANALOGUE PRESSURE GAUGE | 41-884-09 | 41-884-09 | — | — |
| BAXI 824 SYSTEM 2 - INTERNAL FIT PRESSURE GAUGE | 41-884-09 | 41-884-09 | — | — |
Showing 10 of 19 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
