
Broag
Broag Temperature & Pressure Relief FCTP75X75-7
Temperature and pressure relief valve for Broag commercial appliances, part FCTP75X75-7.
At a glance
- Part type: temperature and pressure relief valve (PTRV)
- Also known as 2203555
£339.38
£282.82 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Broag FCTP75X75-7 is a temperature and pressure relief valve (PTRV) used on Broag commercial appliances. It discharges water when system temperature or pressure exceeds safe limits, protecting the appliance and associated pipework. It is supplied as a Broag spare part.
Signs this part needs replacing
- Water continually weeping or dripping from the valve outlet or discharge pipe while the system is cold.
- The valve fails to reseat after discharging, leaving a permanent trickle.
- Discharge occurs during normal running with no overheat or overpressure condition present.
- Scale, corrosion or mineral deposits around the valve body or outlet.
- The valve does not operate when tested using the manual lever.
Before you order
- Confirm the appliance model and part number against the manufacturer's parts list.
- Check the existing valve's connection size and pressure and temperature ratings match the replacement.
- Inspect the discharge pipework for blockage or incorrect routing before fitting.
Compliance
| Alternative numbers | 2203555 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BROAG COMMERCIAL BROAG SPARE PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
