
Broag
Broag Compression Ring 8mm 62361
8 mm compression ring, Broag part 62361, for use in Broag commercial boiler assemblies.
At a glance
- Also known as 1134642
£7.70
£6.42 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Broag 62361 is an 8 mm compression ring used in Broag commercial boiler assemblies. It sits between the pipe and the fitting body inside a compression joint, deforming as the nut is tightened to form a watertight seal. It is a consumable joint component and is normally replaced whenever a joint is broken and re-made.
Signs this part needs replacing
- Weeping or a visible trace of water at the compression joint after the nut has been tightened
- The ring is crushed, distorted or scored and no longer seats cleanly against the pipe
- Corrosion, pitting or discolouration on the ring surface
- The joint has been disturbed and the existing ring will not re-seal
- The nut tightens without building resistance, indicating the ring is not gripping the pipe
Before you order
- Confirm the pipe diameter at the joint is 8 mm
- Check the appliance model against the manufacturer's parts list
- Confirm how many rings the joint or assembly requires
- Inspect the nut and fitting body, as these may also need attention
Compliance
| Alternative numbers | 1134642 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BROAG COMMERCIAL BROAG SPARE PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
