
Baxi
Baxi Gasket Kit 720714601
Baxi 720714601 gasket kit for Broag Commercial appliance spares, sealing mating faces against water, air and flue gas leakage.
At a glance
- Part type: Gasket kit
- Also known as 1134770
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The Baxi 720714601 is a gasket kit manufactured by Baxi for use on its appliances. Gaskets of this type sit between mating faces on the appliance, sealing the joint against water, air or flue gas leakage and holding the correct compression across the assembly. This kit is listed for Broag Commercial appliance spares.
Signs this part needs replacing
- Weeping or dripping at the joint the gasket seals
- Gasket material visibly hardened, flattened or cracked
- Water staining, scale or corrosion around the mating faces
- Flue gas or combustion odour detected near the joint
- A joint that will not seal cleanly after the components are reassembled
Before you order
- Confirm the appliance model and serial number against the compatibility list before ordering
- Check the part number 720714601 on the existing component or in the appliance documentation
- Cross-reference the alternative number 1134770 when checking against older paperwork
Mechanical
| Part type | Gasket kit |
|---|
Compliance
| Manufacturer part number (MPN) | 720714601 |
|---|---|
| Barcode / EAN | 720714601 |
| Commodity code | 8484 90 00 00 |
| GPC classification | Household Boilers/Furnaces/Tank Water Heaters Replacement Parts/Accessories |
| Alternative numbers | 1134770 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BROAG COMMERCIAL BROAG SPARE PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
