Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Hanicks
Basket
Ariston 60000867-01 Ionisation Electrode

Ariston

Ariston 60000867-01 Ionisation Electrode

Ariston 60000867-01 ionisation electrode for Clas HE, Genus HE and E Combi boilers, used to sense flame presence at the burner.

At a glance

  • Part type: Ionisation electrode
  • Also known as 1596479
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
ARISTON60000867-01
Showing prices

£42.00

£35.00 ex. VAT · VAT at 20%

In stock
Cut-off passed — dispatches next working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ariston 60000867-01 is an ionisation electrode manufactured by Ariston for use in its domestic gas boiler range. It sits in the combustion circuit and provides the flame supervision signal, allowing the control board to confirm that ignition has taken place and that the burner is burning safely. It is used across the Clas HE, Genus HE and E Combi appliance families.

Signs this part needs replacing

  • The boiler attempts to ignite but locks out shortly afterwards, with the flame proving signal lost.
  • Repeated ignition cycles where the burner lights and then goes out within a few seconds.
  • A lockout or flame failure fault code appearing on the boiler display.
  • Intermittent shutdowns during a demand for heating or hot water.
  • Visible damage to the electrode tip, ceramic insulator or lead connection.

Before you order

  • Confirm the boiler model and GC number against the compatibility list before purchase.
  • Compare the electrode against the part removed from the appliance, including the insulator and lead length.
  • Check whether a gasket or seal is disturbed during removal and whether a replacement is needed to refit the electrode.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.