Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Altecnic Prescal 300 Pressure Reducing Valve DN80

Altecnic

Altecnic Prescal 300 Pressure Reducing Valve DN80

Altecnic Prescal 300 pressure reducing valve in DN80, used to hold a steady outlet pressure on boosted or high-pressure supplies.

At a glance

  • Part type: pressure reducing valve
Manufacturer part no.
FL-30080
Showing prices

£10,332.58

£8,610.48 ex. VAT · VAT at 20%

Available to order · 5-7 working days
Available to order · 5-7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Prescal 300 Pressure Reducing Valve DN80 is a pressure reducing valve manufactured by Altecnic. It forms part of the Prescal 300 range and is used to regulate the pressure of water entering a system, holding the outlet at a controlled level rather than letting it follow the incoming supply. DN80 refers to the nominal size of the valve connection.

Signs this part needs replacing

  • Outlet pressure creeps or climbs steadily above the set point, even with no draw-off
  • The valve will not hold a steady pressure and readings fluctuate during normal use
  • Water weeps or discharges from the valve body, bonnet or relief arrangement
  • Chatter, humming or vibration is audible through the pipework around the valve
  • Pressure downstream drops sharply, suggesting a blocked or seized internal assembly

Before you order

  • Confirm the pipework connection size matches DN80 and check the existing flange or thread arrangement
  • Check the required downstream pressure against the system design before setting the valve
  • Inspect for an upstream strainer or filter and confirm it is clean and correctly fitted
  • Confirm the valve location allows access for adjustment and future servicing

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.