
Altecnic
Altecnic Manual Air Vent / Drain 3/8 337131
A 3/8 manual air vent and drain fitting from Altecnic, used with its air separation units to release trapped air.
£16.28
£13.57 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic 3/8 manual air vent / drain is a threaded brass fitting used to release trapped air or drain down the circuit on Altecnic air separation units. It forms part of the Altecnic air separation range and is operated by hand rather than by an automatic float mechanism.
Signs this part needs replacing
- The vent weeps or drips at the spindle when closed
- The screw head or spindle has seized and will not turn
- Air remains in the system after repeated venting attempts
- Visible corrosion or scale around the vent body or thread
- Water tracks from the body or thread joint during operation
Before you order
- Confirm the connection size is 3/8 to match the existing tapping
- Check the vent is being fitted to an Altecnic air separation unit
- Inspect the mating thread and sealing face for damage before fitting
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC Air seperation | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
