Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Altecnic 22mm Compression Pressure Reducing Valve with Gauge Port 533851

Altecnic

Altecnic 22mm Compression Pressure Reducing Valve with Gauge Port 533851

Altecnic 22mm compression pressure reducing valve with a gauge port, used to control downstream pressure in heating and plumbing systems.

Manufacturer part no.
533851
Showing prices

£114.79

£95.66 ex. VAT · VAT at 20%

Available to order · 5-7 working days
Available to order · 5-7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Altecnic 22mm Compression Pressure Reducing Valve with gauge port is a pressure regulating valve manufactured by Altecnic for heating and plumbing installations. It connects to 22mm pipework through compression ends and regulates the pressure delivered downstream of the valve. The gauge port allows a pressure gauge to be connected so the outlet pressure can be monitored.

Signs this part needs replacing

  • Downstream pressure creeps above the set point, or rises slowly when no outlets are in use.
  • Outlet pressure fluctuates noticeably as flow or inlet pressure changes.
  • Chatter, water hammer or vibration coming from the valve body.
  • Weeping or visible leaks at the valve body or at the compression joints.
  • Gauge readings become erratic or cannot be held steady at the required setting.

Before you order

  • Confirm the pipework is 22mm and that compression connections suit the installation.
  • Check whether a gauge port is required, or whether a gauge is already available to fit it.
  • Note the downstream pressure the system needs to be set to.
  • Identify the existing valve to confirm it sits within the Altecnic pressure reducing valve range.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.