Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Glow-worm Air Pressure Switch 0020053615

Glow-worm

Glow-worm Air Pressure Switch 0020053615

Air pressure switch for the Glow-worm Micron 50FF gas boiler, part number 0020053615.

At a glance

  • Appliance family: Glow-worm Micron 50FF
  • Also known as 1338523
Manufacturer part no.
0020053615
GC number
E24-972
Showing prices

£72.88

£60.73 ex. VAT · VAT at 20%

Available to order · 3 working days (HRP Trade)
Available to order · 3 working days (HRP Trade)
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The air pressure switch is a safety device used on Glow-worm gas boilers. It monitors the pressure produced by the fan and confirms that combustion air is being moved through the appliance before the boiler is allowed to fire. This switch is listed for the Glow-worm Micron 50FF.

Signs this part needs replacing

  • Boiler fails to fire and locks out, with the fan running but no ignition sequence.
  • Repeated lockouts on start-up that clear only after a reset.
  • Fan runs continuously or the boiler cycles erratically because the switch is not signalling correctly.
  • Fault code or diagnostic indication pointing to the air pressure switch or flue/air proving circuit.
  • Visible damage, perished tubing or corroded terminals at the switch.

Before you order

  • Confirm the boiler model is the Glow-worm Micron 50FF.
  • Check the part number on the existing switch against 0020053615.
  • Inspect the sensing tubes and fan for blockages or faults before assuming the switch is at fault, as these can produce the same symptoms.
  • Work on gas appliances must be carried out by a competent, registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.