
Riello
Riello Air Damper 3007421
Riello 3007421 air damper for GS20D oil burners, used to regulate combustion air into the burner.
At a glance
- Also known as 3205670
£34.52
£28.77 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Riello 3007421 is an air damper for Riello oil burners in the GS20D range. It controls the volume of combustion air drawn into the burner so the air setting can be matched to the nozzle and boiler. It is a serviceable part within the burner's air intake assembly.
Signs this part needs replacing
- The burner air setting will not hold steady, or combustion readings drift after adjustment
- The damper blade or spindle is seized, stiff or loose in its housing
- Visible corrosion, distortion or mechanical damage to the blade or linkage
- Sooting or an unstable flame that persists after cleaning and re-commissioning
- The damper no longer moves through its full travel during burner set-up
Before you order
- Confirm the burner model and code on the data plate — this damper is listed for the GS20D
- Match part number 3007421 against the marking on the existing damper
- Inspect the damper spindle, linkage and housing for wear, as these may also need attention
- Verify the burner variant (R40 GS20D, code 3757713, type 577-T1) before ordering
Compliance
| Alternative numbers | 3205670 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| RIELLO BURNER SPARES | — | — | — | |
| RIELLO R40 GS20D - CODE 3757713 - TYPE 577-T1 | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
