
Riello
Riello Air Damper 3006929
Riello air damper, part 3006929, a plastic air shutter for R40 series oil burners.
At a glance
- Also known as 3205274
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
Replaced by 3006930
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The Riello air damper (part 3006929) is a plastic air shutter used on Riello R40 series burners. It regulates the volume of combustion air drawn into the burner, so the air setting matches the nozzle and combustion head. It supersedes part number 79840.
Signs this part needs replacing
- The damper flap is stiff, seized or does not move through its full travel
- The burner locks out or fails to light after air settings are adjusted
- Sooting, unstable flame or poor combustion readings that cannot be corrected by adjustment
- Cracks, distortion or missing material on the plastic shutter
- The damper no longer holds its set position, causing erratic air regulation
Before you order
- Confirm the burner model and code against the fit list above
- Check the existing part number on the burner or in the manufacturer's parts list
- Note that this part supersedes 79840, so an older burner may carry that number
Compliance
| Alternative numbers | 3205274 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| RIELLO BURNER SPARES | — | — | — | |
| RIELLO R40 FS5D - CODE 3758703 - TYPE 587-M | — | — | — | |
| RIELLO R40 FS5D - CODE 3758704 - TYPE 587-M | — | — | — | |
| RIELLO R40 FS5D - CODE 3758705 - TYPE 587-M | — | — | — | |
| RIELLO R40 GS3 - CODE 3755116 - 3755117 - TYPE 551-T1 | — | — | — | |
| RIELLO R40 GS5 - CODE 3755216 - 3755217 - TYPE 552-T1 | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
