
Vokera
Vokera Domestic Heat Exchanger 8037
Vokera 8037 domestic water heat exchanger for Compact, Linea, Sabre HE and other Vokera combi and system boilers.
At a glance
- Also known as 1531331, N0326
£170.64
£142.20 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Vokera 8037 is a domestic water heat exchanger used in Vokera combi and system boilers. It transfers heat from the primary circuit to the domestic hot water supply. The same component is fitted across the Compact, Linea, Sabre HE and several other Vokera appliance families.
Signs this part needs replacing
- Domestic hot water runs cold or fluctuates in temperature while the boiler is firing
- Reduced hot water flow rate at the taps
- Scale or debris restricting the plate passages, common in hard water areas
- Water weeping from the heat exchanger body or plate seals
- Repeated scale-related faults or lockouts on the domestic hot water side
Before you order
- Confirm the appliance model and, where applicable, the serial number — Vision 30C and Excell 96E fitment depends on serial ranges
- Check that part number 8037 is marked on the existing heat exchanger
- If your appliance is not listed, check your model against the manufacturer's parts list
Compliance
| Alternative numbers | 1531331, N0326 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| VOKERA PROCOMBI CT29 | — | — | — | |
| VOKERA VOKERA COMPACT 29A DIN ERP (20094007) | — | — | — | |
| VOKERA VOKERA COMPACT 29A DIN ERP (20099233) | — | — | — | |
| VOKERA VOKERA COMPACT 29A ERP | — | — | — | |
| VOKERA VOKERA COMPACT 29HE | — | — | — | |
| VOKERA VOKERA EASI-HEAT PLUS 29C | — | — | — | |
| VOKERA VOKERA EXCEL 29 | — | — | — | |
| VOKERA VOKERA EXCEL 29 ERP | — | — | — | |
| VOKERA VOKERA EXCELL 80E | — | — | — | |
| VOKERA VOKERA EXCELL 96E FROM SERIAL No 5/002217 | — | — | — |
Showing 10 of 25 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
