
Ideal
Ideal M20 x 2.0mm Aluminium Flue Cap M&G 950343
Ideal M20 x 2.0mm aluminium flue cap (M&G 950343) for listed Ideal Commercial boilers.
At a glance
- Part type: Flue assembly
£6.74
£5.62 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The M20 x 2.0mm Aluminium Flue Cap (M&G 950343) is a flue assembly component manufactured by Ideal for its commercial boiler range. It is classed as a flue assembly part and is supplied under Ideal part number 209197.
Before you order
- Check the appliance model and output rating against the fitment list above, as the Evomax 2 and Instinct HEAT ranges are listed in multiple outputs and fuel types.
- For Evomax 2 models, confirm whether the appliance is set up for LPG or natural gas (NG) before ordering.
- Compare the M20 x 2.0mm size against the existing flue cap thread to confirm it matches.
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL EVOMAX 2 100KW LPG | 41-796-37 | 41-796-37 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 100KW NG | 41-796-30 | 41-796-30 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 120KW LPG | 41-796-38 | 41-796-38 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 120KW NG | 41-796-31 | 41-796-31 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 150KW NG | 41-796-32 | 41-796-32 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 30KW LPG | 41-796-33 | 41-796-33 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 30KW NG | 41-796-26 | 41-796-26 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 40KW LPG | 41-796-34 | 41-796-34 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 40KW NG | 41-796-27 | 41-796-27 | — | — |
| IDEAL COMMERCIAL EVOMAX 2 60KW LPG | 41-796-35 | 41-796-35 | — | — |
Showing 10 of 22 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
