Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Ideal Pump Head 6m Spares Kit 171868

Ideal

Ideal Pump Head 6m Spares Kit 171868

Ideal 171868 pump head only spares kit with a 6 m head, for Ideal commercial Concord CXC appliances; current part number 1178272.

At a glance

  • Part type: Pump
  • Also known as 7625867023950, IDEAL171868, 266381629629, 43375515
Hanicks code
171868
Manufacturer part no.
171868

AvailabilityCall for price

Availability: no longer made. Call us and we'll check for stock.

No longer made: call us

The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.

01302 279234

Opening hours

Mon–Fri
7:30am–5pm
Sat
9am–12pm
Sun
Closed

Or request a price online

Tell us what you need and we will come back to you. No payment is taken.

Part: 171868 Ideal Pump Head 6m Spares Kit 171868

Whichever you would like us to reply to.

Helps us check the part fits.

30-day returns

Unused, in original packaging.

What it is

The Ideal 171868 is a pump head only spares kit rated at 6 m head, produced for Ideal commercial Concord CXC appliances. The pump head is the motor and impeller assembly that circulates water through the boiler and the heating circuit, so it sits at the centre of the appliance's flow and return arrangement. Supplying the head on its own allows the pump body to stay in place on the pipework while the working half of the pump is renewed.

Signs this part needs replacing

  • Heating or hot water stops altogether while the boiler still fires and the pipework close to the pump stays cool.
  • The appliance locks out or reports a circulation or flow fault shortly after start-up.
  • The pump head becomes noisy, hums, vibrates or runs noticeably hotter than the surrounding pipework.
  • Radiators heat unevenly or take far longer than usual to reach temperature, with a wide difference between flow and return.
  • The overheat thermostat trips repeatedly on a system that has been correctly vented and dosed.

Before you order

  • Check the appliance GC number and model against the compatibility list, as the same appliance family uses more than one pump variant.
  • Confirm the current part number 1178272 before ordering, as the original 171868 reference has been replaced.
  • Inspect the pump body, gasket and seals while the head is removed, and renew any that are perished or flattened.
  • Isolate the electrical supply and close the isolating valves before dismantling the pump head.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.