
Vokera
Vokera Gasket+Screw Kit For Venturi 105908
Gasket and screw kit for the venturi assembly on Vokera Condexa PRO boilers, part 105908.
At a glance
- Also known as 105908VOK, 1530931
£53.47
£44.56 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Vokera 105908 Gasket+Screw Kit For Venturi is a service kit for the venturi assembly on Vokera Condexa PRO gas boilers. The venturi sits in the air/gas path and the gasket seals the joint between the venturi and its mounting face, with the screws securing the assembly. It is a consumable item intended for replacement whenever the venturi is removed or the joint is disturbed.
Signs this part needs replacing
- Visible cracking, hardening or flattening of the venturi gasket
- Staining or soot tracking around the venturi joint
- Combustion readings drifting or failing to settle after service
- A smell of gas or products of combustion around the venturi area
- Corroded, seized or damaged venturi fixing screws
Before you order
- Confirm your boiler model against the fitment list above
- Check the venturi assembly is being removed or resealed, as the gasket is single-use once disturbed
- Inspect the venturi body and mounting face for damage before refitting
- Have the appliance recommissioned and combustion checked after the work
Compliance
| Alternative numbers | 105908VOK, 1530931 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| VOKERA VOKERA CONDEXA PRO 100M | — | — | — | |
| VOKERA VOKERA CONDEXA PRO 100S | — | — | — | |
| VOKERA VOKERA CONDEXA PRO 50M | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
