Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Alpha Main Wiring Harness 1041381

Alpha

Alpha Main Wiring Harness 1041381

Alpha main wiring harness, part 1041381, for the internal electrical connections within Alpha gas boiler assemblies.

At a glance

  • Part type: main wiring harness
Manufacturer part no.
1041381
Showing prices

£91.90

£76.58 ex. VAT · VAT at 20%

Available to order · 5-7 working days
Available to order · 5-7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The main wiring harness is the internal loom that carries power and control signals between the major electrical components of an Alpha boiler. It connects the printed circuit board to the fan, pump, gas valve, sensors and user controls through a set of moulded plugs and terminals. This is the Alpha 1041381 harness, listed by the manufacturer under the Alpha brand.

Signs this part needs replacing

  • The boiler intermittently loses power or fails to fire with no obvious fault at the PCB
  • Error codes appear and clear at random, particularly after the casing has been disturbed
  • Visible scorching, brittleness or cracked insulation on one or more harness conductors
  • Loose, corroded or heat-damaged spade terminals and plug connectors
  • Continuity faults traced along the loom during electrical testing

Before you order

  • Confirm the boiler model and GC number from the data badge, then check them against the compatibility list on this page
  • Compare the connector layout and pin count of the existing harness with the replacement before fitting
  • Isolate the electrical supply at the fused spur and follow the manufacturer's wiring diagram when refitting
  • Inspect the PCB and component plugs for damage that may have caused the original harness fault

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.