
Baxi
Baxi Pan Pozi Screw M4 x 10mm 062757
Baxi 062757 pan Pozi screw, M4 x 10mm, for securing components within compatible Baxi and Potterton boilers.
£2.40
£2.00 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Baxi 062757 is an M4 x 10mm pan Pozi screw, classed in the Bolts, Nuts & Screws category. It is a fixing used to secure components within Baxi and Potterton gas boilers.
Before you order
- Confirm your boiler model against the fitment list above before ordering.
- Check the screw size and thread on the existing fixing to ensure an M4 x 10mm replacement is required.
- Note the Pozi drive type so the correct screwdriver bit is available for fitting.
Compliance
| GC number | E04-666 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BAXI BAHAMA 100 - HONEYWELL CONTROLS | 47-075-02 | 47-075-02 | — | — |
| BAXI BAHAMA 100 - SIT CONTROLS | 47-075-01 | 47-075-01 | — | — |
| BAXI BERMUDA BBU 15 HE | 44-075-09 | 44-075-09 | — | — |
| POTTERTON APOLLO 25 | 47-393-38 | 47-393-38 | — | — |
| POTTERTON APOLLO 30 | 47-393-37 | 47-393-37 | — | — |
| POTTERTON GOLD 30 FSB | 41-592-32 | 41-592-32 | — | — |
| POTTERTON PROMAX 30 HE FSB | 41-595-39 | 41-595-39 | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
BAXI appliance manual — BAHAMA 100 - HONEYWELL CONTROLS (GC 47-075-02), BAHAMA 100 - SIT CONTROLS (GC 47-075-01)
manualmanualBAXI appliance manual — BERMUDA BBU 15 HE (GC 44-075-09)
manualmanualPOTTERTON appliance manual — APOLLO 25 (GC 47-393-38), APOLLO 30 (GC 47-393-37)
manualmanualPOTTERTON appliance manual — GOLD 30 FSB (GC 41-592-32)
manualmanualPOTTERTON appliance manual — PROMAX 30 HE FSB (GC 41-595-39)
manualNo technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
